2018 Freightliner M2 Extended Cab – 144”CA, , , , , , , , , ,
2018 Freightliner M2 Extended Cab – 144”CA - Stock #2703

Click the above picture for larger images



2018 Freightliner M2 Extended Cab – 144″CA – Stock #2703

Cummins 300 HP – Air Locking Rear Differential – Premium Driver Seat

Stock #2703

*Not actual photos*

**We have this unit in stock and scheduled to build in October with the following specifications.**

** We also have a Chevron S12 21.5 ft car carrier in stock and can build this chassis with this deck with no SidePuller™ or build with Chevron S12 20.5 ft Standard Deck with SidePuller™.**

 

  • Cummins ISB 6.7L – 300hp
  • Variable Geometry Turbocharger with Exhaust Brake
  • 2010 EPA/CARB Emission Certified
  • 6-Speed Allison Automatic Transmission
  • 26,000 Lbs. GVWR
  • 10,000lb. Front Axle
  • 10,000lb. Front Suspension
  • 21,000lb Rear Axle
  • 4.88 Rear Ratio
  • Air Locking Rear Differential
  • 21,000lb. Rear Suspension with Dump Valve
  • Auto Engine Fan Control with Manual Switch on Dash
  • Air Brake System
  • Air Dryer with Heater
  • 144″ Cab-To-Axle
  • (2) 50 Gallon Polished Aluminum Fuel Tank – Driver side and Passenger side
  • Polished Stainless Steel Steps – Driver side and Passenger side
  • 6 Gallon DEF Tank
  • Snow Shield for Fresh Air Intake
  • Continental HSR2 Front Tires: 255/70R22.5
  • Continental HDR Rear Tires – 255/70R22.5
  • Polished Aluminum Wheels With Dura-Bright Finish (4) Steel Inside (2)
  • (2) Alliance Maintenance Free 1900 CCA Batteries
  • 160-Amp Alternator
  • 18.7-CFM Air Compressor
  • Electric Grid Air Intake Warmer
  • 750 Watt / 115 Volt Block Heater
  • Chrome Bumper; Grille; Air Intake; Headlight Bezels
  • LED Marker Lights
  • Dual West Coast Bright Finish Mirrors – Power Operated
  • Opal Gray Vinyl Interior
  • Premium Air Ride Driver Seat with Dual Armrests
  • Bucket Passenger Seat
  • Full Width Rear Bench Passenger Seat
  • Tilt-Telescoping Steering Wheel
  • Power Windows / Power Door Locks / Cruise Control / Power Mirrors
  • AM/FM/WB/CD/Bluetooth Radio with Front Auxiliary/USB Inputs
  • Daytime Running Lights

SP9000™ Generation IV Hydraulic Side Puller – Features Include

  • Boom Rating – 9,000 lbs.
  • Stiff Leg Rating – 9,000 lbs.
  • 9,000 lb. High Speed Planetary Winch
  • 3/8″ x 100′ Steel Core Winch line
  • Winch Tensioner
  • Easy Access Free-Spool Release Handle
  • Hydraulic Stiff Legs with pavement pad and ice grousers (Internal lock valve prevents retraction in the event hose failures)
  • Flipper Foot Spades (including Low-Pull attachment points)
  • Ten Tie-Back Points
  • Center Pivoting Boom Head (Can be used to recover by itself)!
  • “Revolution Outer Boom Head” – from “In-The Ditch Towing Products”. Features a pivoting guide with removable guide cover to easily set-up your wire rope for use.
  • Painted Black – PPG Paint (Limited Lifetime Warranty)
  • “Mobile Control Systems” Wireless Remote Control is used to operate Carrier & SidePuller™ Winches.
  • IWS Exclusive – Custom Swept-wing LED Lightbar with Angled Steel Pylon & Stainless Steel Trim-work. This custom Lightbar uses Towmate’s Power Link technology to power (22) Individual LED Light Modules for an awesome strobe bar with built in directional arrow stick on the rear. This also includes rear LED brake, turn and tail lights.

20.5’ Chevron Series 12 LCG Car Carrier (LoadRite Option)

What is the LoadRite Option?  Simply stated…this incredible feature is Chevron’s version of the popular improved load angle design at the aft end of the carrier deck.  The LoadRite Option improves an already incredibly low LCG load angle by an additional 3 Degrees.

Why is LoadRite better?  This creative approach utilizes a recessed main deck while body sides remain unaltered and level from front to back. This brilliant design eliminates the need of fixed side rails (commonly referred to as fins) to reinforce the angled tailboard.  On steel bodies; a bonus standard feature adds chain locks at 12” spacing on both sides – front to back on the interior vertical sills.  Added to the existing horizontal deck mounted chain locks; this provides over 40 tie-down points to secure your load!  This is a Chevron Exclusive Feature!

  • 20.5ft Steel Rollback Car Carrier Body
  • LoadRite option
  • 12,000lb Deck Rating
  • 102 In. Wide Body
  • (12) Chain Locks/Tie-Down Points (Horizontal Deck)
  • 3/16 “One-Piece” Deck Plate Carrier Surface
  • 2 X 2 “CorTen” Steel Tube Cross Members – 8 Inches on Center
  • Four Safety Chains – 2 Front, 2 Rear
  • Front Left and Right Chain Trays
  • 24 GPM Direct Mount Pump Replaces Standard 18 GPM Pump
  • High Speed 9,000 Lb. Planetary Low Mount Car Carrier Winch
  • Air controlled free spool for the winch. This option allows free-spool control of the winch from the control station so you don’t have to walk to the winch every time.
  • 3/8″ x 50′ Winchline with Swivel Hook
  • Cable Tensioner
  • Cable Roller Guide
  • Independent 4,000lb Rated Wheel Lift
  • 4,000 L-Arms with Wheel Retainer Pans
  • Releasable L-Arm Wheel Retainers
  • Mechanical Anti-Tilt to prevent rollback tilting while in bed locks
  • Wheel Lift Tie-Down Straps & Ratchets
  • Illuminated Dual Controls now with LED Lighting
  • Includes Side Puller Control Handles to Manually Operate Legs & Winch (allows feathering speeds of winch and legs)
  • LED Body & Tail Lighting
  • Strobing Body & Tail Lights
  • Water Resistant Junction Box for Wire Harness Connection
  • “Mobile Control Systems” Wireless Remote Control for Carrier & SidePuller™ Winches.
  • Removable Steel Open Side Rails
  • Deck Mounted Work Lights – L.E.D.
  • Lower Work Lights – L.E.D.

Equipped with the Most Popular Tool Box Package Available!!!

Driver Side Includes:

  • 70” x 18” x 18” – ‘In the Ditch’ Pro Series Aluminum Tool Box
  • ‘In the Ditch’ Galvanized Quick Hang Tool Box Mounts – 3 each
  • 70” x 16” Aluminum Box Top Tray – with 2 equipment dividers
  • 34.75” Storage Fender
  • Raised aluminum interior shelf – full box length
  • 2 upper shelf equipment dividers
  • 4 lower shelf equipment dividers
  • (2) LED interior tool box lights
  • LED Storage Fender Strip Lighting
  • Shielded Wiring Bracket
  • 4 Gallon Trash Can & Mount
  • 5 Gallon Fuel Can & Mount
  • Dura-Grid Black Matting – (Tool Box & Top Tray)

Passenger Side Includes:

  • 70”x18”x18” – ‘In the Ditch’ Pro Series Aluminum Tool Box
  • ‘In the Ditch’ Galvanized Quick Hang Tool Box Mounts – 3 each
  • 70” Aluminum Lumber/Storage Basket – Mounted behind tool box
  • 70” x 16” Aluminum Box Top Tray – No dividers to store longer items
  • 34.75” Storage Fender
  • Raised aluminum interior shelf – half box length
  • Revolutionary new floor jack storage bracket with drain holes
  • ‘Torin’ 2.5 Ton Floor Jack
  • (2) LED interior tool box lights
  • LED Storage Fender Strip Lighting
  • Lug wrench bracket – Holds 2 wrenches
  • Hook rack – 4 hooks to hold tape, shackles, etc.
  • Air Service Fitting – Dust Cover Included
  • Shielded Air & Wiring Bracket
  • 4 Gallon Trash Can & Mount
  • 5 Gallon Fuel Can & Mount
  • Dura-Grid Black Matting – (Tool Box & Top Tray)



Due to continued product improvement and changes in supply, design, and production equipment, colors, material specifications, prices, and model availability are subject to change without notice. Some photography may show optional items.