Tag Archives: Idaho

2018 International 4300 Crew Cab – 144”CA *SOLD*

Stock # 0401

Built and Ready to go to work!!!

2018 International 4300 Crew Cab – 25,999 GVWR 144”CA

Big Horsepower, Big Warranty, Navigation on Wing Dash, Air Locking Differential!

Key features include:

  • Cummins ISB 6.7L Diesel – 300hp (50 State – CARB Compliant)
  • Cummins 5yr/300K Mile Engine Extended Warranty – (Protection Plan 1) – Covers Turbo, Injectors, Water Pump and More!
  • Cummins 5yr/300K After-Treatment – Complete Coverage includes Diesel Particulate Filter, SCR Catalyst, and Sensors!
  • VGT Exhaust Brake
  • Allison 2200 RDS Automatic – 6 Speed
  • 10,000 lb. FAWR
  • 21,000 lb. RAWR – (4.88 Axle Ratio)
  • Air Locking Rear Differential – Driver Selected On/Off
  • 20,000 lb. Rear Air Suspension with Dump Valve
  • Unique Contoured Wing Dash – (Allows GPS Monitor to be seen clearly)
  • Corrosion Resistant “ACCU-SHIELD” Aluminum Wheels
  • Dual Polished Aluminum Fuel Tanks – 120 Gallon Fuel Total Capacity!
  • Exterior Sun Visor
  • GPS/Navigation (Rand McNally) – Am/Fm/MP3/Bluetooth Stereo

Additional Features Include:

  • 7 Gallon DEF Tank
  • Full Air Brake System
  • Air Driver Seat with RH Armrest
  • Passenger Bucket Seat
  • Full Rear Bench Seat
  • Factory Aux Switch Panel
  • 255/70R22.5 Tires
  • Chrome Bumper
  • Chrome Finish Grill
  • Daytime Running Lights
  • Power Windows – Locks – Mirrors
  • Muncie Hot Shift PTO with Idle-Up
  • Waterproof Circuit Breaker (80 Amps)
  • Stainless Steel Wheel Hub & Lug Nut Covers

SP9000™ Generation IV Hydraulic SidePuller™ – Features Include:

  • Stainless Steel Sign Panel
  • Boom Rating – 8,000 lbs.
  • Stiff Leg Rating – 8,000 lbs.
  • 9,000 lb. High Drive Planetary Winch
  • 3/8″ x 100′ Steel Core Winchline
  • Winch Tensioner
  • Easy Access Free-Spool Release Handle
  • Hydraulic Stiff Legs with pavement pad and ice grousers (Internal lock valve prevents retraction in the vent hose failures)
  • Flipper Foot Spades (including Low-Pull attachment points)
  • Ten Tie-Back Points
  • Center Pivoting Boom Head (Can be used to recover by itself!)
  • “Revolution Boom Head” – New from “In-The Ditch™ Towing Products”. Features a pivoting guide with removable guide cover to easily set-up your wire rope for use.
  • Painted Black – PPG Paint (Limited Lifetime Warranty)
  • “Mobile Control Systems” Wireless Remote Control is used to operate Carrier & Side Puller Winches.
  • IWS Exclusive – Custom Swept-wing LED Lightbar with Angled Steel Pylon & Stainless Steel Trim-work. This custom Lightbar uses Towmate’s Power Link technology to power (22) Individual LED Light Modules for an awesome strobe bar with built in directional arrow stick on the rear. This also includes rear LED brake, turn and tail lights, and 2 White-LED Swivel Work Lights

21.5’ Chevron Series 12 LCG Car Carrier

  • 12,000lb Deck Rating
  • 3/16 “One-Piece” Deck Plate Carrier Surface
  • Front Left and Right Chain Trays
  • 2 X 2 “CorTen” Steel Tube Cross Members – 8 Inches on Center
  • 102 In. Wide Body
  • 2 Front / 4 Rear Chain Locks
  • 6 Floor Plate Chain Locks
  • Four Safety Chains – 2 Front, 2 Rear
  • Front Left and Right Chain Trays
  • 24 GPM Direct Mount Pump Replaces Standard 18 GPM Pump
  • High Speed 9,000 Lb. Planetary Low Mount Car Carrier Winch
  • Air controlled free spool for the winch. This option allows free-spool control of the winch from the control station so you don’t have to walk to the winch every time.
  • 3/8″ x 50′ Winchline with Swivel Hook
  • Cable Tensioner
  • Cable Roller Guide
  • Independent 4,000lb Rated Wheel Lift
  • 4,000 L-Arms with Wheel Retainer Pans
  • Releasable L-Arm Wheel Retainers
  • Mechanical Anti-Tilt to prevent rollback tilting while in bed locks
  • Wheel Lift Tie-Down Straps & Ratchets
  • Illuminated Dual Controls with Driver Side Hydraulic Pressure Gauge
  • Includes Side Puller Control Handles to Manually Operate Legs & Winch (allows feathering speeds of winch and legs)
  • LED Body & Tail Lighting
  • Strobing Body & Tail Lights
  • Water Resistant Junction Box for Wire Harness Connection
  • Wireless Remote Control for Carrier & Side Puller Winches
  • Removable Steel Open Side Rails
  • Deck Mounted Work Lights – L.E.D.
  • Lower Work Lights – L.E.D.

Equipped with the Most Popular Tool Box Package Available!!!

70”x18”x18” – ‘In the Ditch™’ Pro Series™ Aluminum Tool Box – Driver Side Includes:

  • Galvanized Tool Box Mounts – 3 each
  • 70” x 16” Aluminum Box Top Tray – with 2 equipment dividers
  • 34.75” Storage Fender
  • Raised aluminum interior shelf – full box length
  • 2 upper shelf equipment dividers
  • 4 lower shelf equipment dividers
  • (2) LED interior tool box lights
  • LED Storage Fender Strip Lighting
  • Shielded Wiring Bracket
  • 4 Gallon Trash Can & Mount
  • 5 Gallon Liquid Can & Mount
  • Dry Dek Matting – (Tool Box & Top Tray)

70”x18”x18” – ‘In the Ditch™’ Pro Series™ Aluminum Tool Box – Passenger Side Includes:

  • Galvanized Tool Box Mounts – 3 each
  • 70” Aluminum Lumber/Storage Basket – Mounted behind tool box
  • 70” x 16” Aluminum Box Top Tray – No dividers to store longer items
  • 34.75” Storage Fender
  • Raised aluminum interior shelf – half box length
  • Revolutionary new floor jack storage bracket with drain holes
  • ‘Torin’ 2.5 Ton Floor Jack
  • (2) LED interior tool box lights
  • LED Storage Fender Strip Lighting
  • Lug wrench bracket – Holds 2 wrenches
  • Hook rack – 4 hooks to hold tape, shackles, etc.
  • Air Service Fitting
  • Shielded Air & Wiring Bracket
  • 4 Gallon Trash Can & Mount
  • 5 Gallon Liquid Can & Mount
  • Dry Dek Matting – (Tool Box & Top Tray)

Additional Accessories

  • 1 Magnetic LED Tow Light w/ Round Magnets

2018 Freightliner M2 Extended Cab – 144″CA *SOLD*

Stock # 8991

** We have this unit in stock with the following specifications.  If a SidePuller™ is not in your plans, we can make changes to customize for your needs!**

2018 Freightliner M2 Extended Cab – 144″CA

Cummins 260 HP  – Premium Driver Seat

        • Cummins ISB 6.7L – 260hp
        • Variable Geometry Turbocharger with Exhaust Brake
        • 2010 EPA/CARB Emission Certified
        • 6-Speed Allison Automatic Transmission
        • 26,000 Lbs. GVWR
        • 10,000lb. Front Axle
        • 10,000lb. Front Suspension
        • 19,000lb Rear Axle
        • 4.88 Rear Ratio
        • 18,000lb. Rear Suspension with Dump Valve
        • Air Brake System
        • Air Dryer with Heater
        • 144″ Cab-To-Axle
        • (2) 50 Gallon Polished Aluminum Fuel Tank – Driver side and Passenger side
        • 6 Gallon DEF Tank
        • Dual Polished Aluminum Air Horns Roof Mounted
        • Michelin Front Tires: 255/70R22.5
        • Michelin Rear Tires – 255/70R22.5
        • Polished Aluminum Wheels (4) Steel Inside (2)
        • (2) Alliance Maintenance Free 1900 CCA Batteries
        • 160-Amp Alternator
        • 18.7-CFM Air Compressor
        • Electric Grid Air Intake Warmer
        • 750 Watt / 115 Volt Block Heater
        • Chrome Bumper; Grille; Air Intake; Headlight Bezels
        • LED Marker Lights
        • Dual West Coast Bright Finish Mirrors – Power Operated
        • Opal Gray Vinyl Interior
        • Air Ride Driver Seat with Dual Armrests
        • Bucket Passenger Seat
        • Full Width Rear Bench Passenger Seat
        • Tilt-Telescoping Steering Wheel
        • Power Windows / Power Door Locks / Cruise Control / Power Mirrors
        • AM/FM/WB/CD/Bluetooth Radio with Front Auxiliary/USB Inputs
        • Daytime Running Lights
        • Equipped with ON-Spot Automatic Winter Tire Chain System

     

 

SP9000™ Generation IV Hydraulic Side Puller – Features Include

  • Boom Rating – 9,000 lbs.
  • Stiff Leg Rating – 9,000 lbs.
  • 9,000 lb. High Speed Planetary Winch
  • 3/8″ x 100′ Steel Core Winch line
  • Winch Tensioner
  • Easy Access Free-Spool Release Handle
  • Hydraulic Stiff Legs with pavement pad and ice grousers (Internal lock valve prevents retraction in the event hose failures)
  • Flipper Foot Spades (including Low-Pull attachment points)
  • Ten Tie-Back Points
  • Center Pivoting Boom Head (Can be used to recover by itself)!
  • “Revolution Outer Boom Head” – New from “In-The Ditch Towing Products”. Features a pivoting guide with removable guide cover to easily set-up your wire rope for use.
  • Painted Black – PPG Paint (Limited Lifetime Warranty)
  • “Mobile Control Systems” Wireless Remote Control is used to operate Carrier & SidePuller™ Winches.
  • IWS Exclusive – Custom Swept-wing LED Lightbar with Angled Steel Pylon & Stainless Steel Trim-work. This custom Lightbar uses Towmate’s Power Link technology to power (22) Individual LED Light Modules for an awesome strobe bar with built in directional arrow stick on the rear. This also includes rear LED brake, turn and tail lights.

20.5’ Chevron Series 12 LCG Car Carrier

  • 20.5ft Steel Rollback Car Carrier Body
  • 12,000lb Deck Rating
  • 102 In. Wide Body
  • (13) Chain Locks/Tie-Down Points (Horizontal Deck)
  • 3/16 “One-Piece” Deck Plate Carrier Surface
  • 2 X 2 “CorTen” Steel Tube Cross Members – 8 Inches on Center
  • Four Safety Chains – 2 Front, 2 Rear
  • Front Left and Right Chain Trays
  • 24 GPM Direct Mount Pump Replaces Standard 18 GPM Pump
  • High Speed 9,000 Lb. Planetary Low Mount Car Carrier Winch
  • Air controlled free spool for the winch. This option allows free-spool control of the winch from the control station so you don’t have to walk to the winch every time.
  • 3/8″ x 50′ Winchline with Swivel Hook
  • Cable Tensioner
  • Cable Roller Guide
  • Independent 4,000lb Rated Wheel Lift
  • 4,000 L-Arms with Wheel Retainer Pans
  • Releasable L-Arm Wheel Retainers
  • Mechanical Anti-Tilt to prevent rollback tilting while in bed locks
  • Wheel Lift Tie-Down Straps & Ratchets
  • Illuminated Dual Controls
  • Includes Side Puller Control Handles to Manually Operate Legs & Winch (allows feathering speeds of winch and legs)
  • LED Body & Tail Lighting
  • Strobing Body & Tail Lights
  • Water Resistant Junction Box for Wire Harness Connection
  • “Mobile Control Systems” Wireless Remote Control for Carrier & SidePuller™ Winches.
  • Removable Steel Open Side Rails
  • Deck Mounted Work Lights – L.E.D.
  • Lower Work Lights – L.E.D.

Equipped with the Most Popular Tool Box Package Available!!!

Driver Side Includes:

  • 70” x 18” x 18” – ‘In the Ditch’ Pro Series Aluminum Tool Box
  • ‘In the Ditch’ Quick Hang Tool Box Mounts – 3 each
  • 70” x 16” Aluminum Box Top Tray – with 2 equipment dividers
  • 34.75” Storage Fender
  • Raised aluminum interior shelf – full box length
  • 2 upper shelf equipment dividers
  • 4 lower shelf equipment dividers
  • (2) LED interior tool box lights
  • LED Storage Fender Strip Lighting
  • Shielded Wiring Bracket
  • 4 Gallon Trash Can & Mount
  • 5 Gallon Fuel Can & Mount
  • Dura-Grid Black Matting – (Tool Box & Top Tray)

Passenger Side Includes:

  • 70”x18”x18” – ‘In the Ditch’ Pro Series Aluminum Tool Box
  • ‘In the Ditch’ Quick Hang Tool Box Mounts – 3 each
  • 70” Aluminum Lumber/Storage Basket – Mounted behind tool box
  • 70” x 16” Aluminum Box Top Tray – No dividers to store longer items
  • 34.75” Storage Fender
  • Raised aluminum interior shelf – half box length
  • Revolutionary new floor jack storage bracket with drain holes
  • ‘Torin’ 2.5 Ton Floor Jack
  • (2) LED interior tool box lights
  • LED Storage Fender Strip Lighting
  • Lug wrench bracket – Holds 2 wrenches
  • Hook rack – 4 hooks to hold tape, shackles, etc.
  • Air Service Fitting – Dust Cover Included
  • Shielded Air & Wiring Bracket
  • 4 Gallon Trash Can & Mount
  • 5 Gallon Fuel Can & Mount
  • Dura-Grid Black Matting – (Tool Box & Top Tray)

 

2018 International 4300 Extended Cab – 144”CA *SOLD*

2018 International 4300 Extended Cab – 25,999 GVWR 144”CA

Stock # 0400

** We have this unit in stock and ready to build with the following specifications.  Optional LoadRite deck available.  If a SidePuller™ is not in your plans, we can make changes to customize for your needs!**

Scheduled for Build – Photos of similar unit

Big Horsepower, Big Warranty, Navigation on Wing Dash, Air Locking Differential!

Key features include:

  • Cummins ISB 6.7L Diesel – 300hp (50 State – CARB Compliant)
  • Cummins 5yr/300K Mile Engine Extended Warranty – (Protection Plan 1) – Covers Turbo, Injectors, Water Pump and More!
  • Cummins 5yr/300K After-Treatment – Complete Coverage includes Diesel Particulate Filter, SCR Catalyst, and Sensors!
  • VGT Exhaust Brake
  • Allison 2200 RDS Automatic – 6 Speed
  • 10,000 lb. FAWR
  • 21,000 lb. RAWR – (4.88 Axle Ratio)
  • Air Locking Rear Differential – Driver Selected On/Off
  • 20,000 lb. Rear Air Suspension with Dump Valve
  • Unique Contoured Wing Dash – (Allows GPS Monitor to be seen clearly)
  • Corrosion Resistant “ACCU-SHIELD” Aluminum Wheels
  • Large 70 Gallon Polished Aluminum Fuel Tank
  • Exterior Sunvisor
  • GPS/Navigation (Rand McNally) – Am/Fm/MP3/Bluetooth Stereo

Additional Features Include:

  • 7 Gallon DEF Tank
  • Full Air Brake System
  • Air Driver Seat with RH Armrest
  • Passenger Bucket Seat
  • Full Rear Bench Seat
  • Factory Aux Switch Panel
  • 255/70R22.5 Tires
  • Chrome Bumper
  • Chrome Finish Grill
  • Daytime Running Lights
  • Power Windows – Locks – Mirrors
  • Muncie Hot Shift PTO with Idle-Up
  • Waterproof Circuit Breaker (80 Amps)
  • Stainless Steel Wheel Hub & Lug Nut Covers

SP9000™ Generation IV Hydraulic SidePuller™ – Features Include:

  • Stainless Steel Sign Panel
  • Boom Rating – 8,000 lbs.
  • Stiff Leg Rating – 8,000 lbs.
  • 9,000 lb. High Drive Planetary Winch
  • 3/8″ x 100′ Steel Core Winchline
  • Winch Tensioner
  • Easy Access Free-Spool Release Handle
  • Hydraulic Stiff Legs with pavement pad and ice grousers (Internal lock valve prevents retraction in the vent hose failures)
  • Flipper Foot Spades (including Low-Pull attachment points)
  • Ten Tie-Back Points
  • Center Pivoting Boom Head (Can be used to recover by itself!)
  • “Revolution Boom Head” – New from “In-The Ditch™ Towing Products”. Features a pivoting guide with removable guide cover to easily set-up your wire rope for use.
  • Painted Black – PPG Paint (Limited Lifetime Warranty)
  • “Mobile Control Systems” Wireless Remote Control is used to operate Carrier & Side Puller Winches.
  • IWS Exclusive – Custom Swept-wing LED Lightbar with Angled Steel Pylon & Stainless Steel Trim-work. This custom Lightbar uses Towmate’s Power Link technology to power (22) Individual LED Light Modules for an awesome strobe bar with built in directional arrow stick on the rear. This also includes rear LED brake, turn and tail lights, and 2 White-LED Swivel Work Lights

20.5’ Chevron Series 12 LCG Car Carrier

  • 12,000lb Deck Rating
  • 3/16 “One-Piece” Deck Plate Carrier Surface
  • Front Left and Right Chain Trays
  • 2 X 2 “CorTen” Steel Tube Cross Members – 8 Inches on Center
  • 102 In. Wide Body
  • 2 Front / 4 Rear Chain Locks
  • 6 Floor Plate Chain Locks
  • Four Safety Chains – 2 Front, 2 Rear
  • Front Left and Right Chain Trays
  • 24 GPM Direct Mount Pump Replaces Standard 18 GPM Pump
  • High Speed 9,000 Lb. Planetary Low Mount Car Carrier Winch
  • Air controlled free spool for the winch. This option allows free-spool control of the winch from the control station so you don’t have to walk to the winch every time.
  • 3/8″ x 50′ Winchline with Swivel Hook
  • Cable Tensioner
  • Cable Roller Guide
  • Independent 4,000lb Rated Wheel Lift
  • 4,000 L-Arms with Wheel Retainer Pans
  • Releasable L-Arm Wheel Retainers
  • Mechanical Anti-Tilt to prevent rollback tilting while in bed locks
  • Wheel Lift Tie-Down Straps & Ratchets
  • Illuminated Dual Controls with Driver Side Hydraulic Pressure Gauge
  • Includes Side Puller Control Handles to Manually Operate Legs & Winch (allows feathering speeds of winch and legs)
  • LED Body & Tail Lighting
  • Strobing Body & Tail Lights
  • Water Resistant Junction Box for Wire Harness Connection
  • Wireless Remote Control for Carrier & Side Puller Winches
  • Removable Steel Open Side Rails
  • Deck Mounted Work Lights – L.E.D.
  • Lower Work Lights – L.E.D.

Equipped with the Most Popular Tool Box Package Available!!!

70”x18”x18” – ‘In the Ditch™’ Pro Series™ Aluminum Tool Box – Driver Side Includes:

  • Galvanized Tool Box Mounts – 3 each
  • 70” x 16” Aluminum Box Top Tray – with 2 equipment dividers
  • 34.75” Storage Fender
  • Raised aluminum interior shelf – full box length
  • 2 upper shelf equipment dividers
  • 4 lower shelf equipment dividers
  • (2) LED interior tool box lights
  • LED Storage Fender Strip Lighting
  • Shielded Wiring Bracket
  • 4 Gallon Trash Can & Mount
  • 5 Gallon Liquid Can & Mount
  • Dry Dek Matting – (Tool Box & Top Tray)

70”x18”x18” – ‘In the Ditch™’ Pro Series™ Aluminum Tool Box – Passenger Side Includes:

  • Galvanized Tool Box Mounts – 3 each
  • 70” Aluminum Lumber/Storage Basket – Mounted behind tool box
  • 70” x 16” Aluminum Box Top Tray – No dividers to store longer items
  • 34.75” Storage Fender
  • Raised aluminum interior shelf – half box length
  • Revolutionary new floor jack storage bracket with drain holes
  • ‘Torin’ 2.5 Ton Floor Jack
  • (2) LED interior tool box lights
  • LED Storage Fender Strip Lighting
  • Lug wrench bracket – Holds 2 wrenches
  • Hook rack – 4 hooks to hold tape, shackles, etc.
  • Air Service Fitting
  • Shielded Air & Wiring Bracket
  • 4 Gallon Trash Can & Mount
  • 5 Gallon Liquid Can & Mount
  • Dry Dek Matting – (Tool Box & Top Tray)

Additional Accessories

  • 1 Nylon V Bridle With 24″ Legs and Cluster Hooks 5,400lb WLL
  • 8-point tie-down system with D-ring
  • 1 Magnetic LED Tow Light w/ Round Magnets

2018 International 4300 Extended Cab – 144”CA *SOLD*

2018 International 4300 Extended Cab – 25,999 GVWR 144”CA

Stock # 1820

** We have this unit in stock and ready to build with the following specifications.  Optional LoadRite deck available.  If a SidePuller™ is not in your plans, we can make changes to customize for your needs!**

Scheduled for Build – Photos of similar unit

Big Horsepower, Big Warranty, Navigation on Wing Dash, Air Locking Differential!

Key features include:

  • Cummins ISB 6.7L Diesel – 300hp (50 State – CARB Compliant)
  • Cummins 5yr/300K Mile Engine Extended Warranty – (Protection Plan 1) – Covers Turbo, Injectors, Water Pump and More!
  • Cummins 5yr/300K After-Treatment – Complete Coverage includes Diesel Particulate Filter, SCR Catalyst, and Sensors!
  • VGT Exhaust Brake
  • Allison 2200 RDS Automatic – 6 Speed
  • 10,000 lb. FAWR
  • 21,000 lb. RAWR – (4.88 Axle Ratio)
  • Air Locking Rear Differential – Driver Selected On/Off
  • 20,000 lb. Rear Air Suspension with Dump Valve
  • Unique Contoured Wing Dash – (Allows GPS Monitor to be seen clearly)
  • Corrosion Resistant “ACCU-SHIELD” Aluminum Wheels
  • Large 70 Gallon Polished Aluminum Fuel Tank
  • Exterior Sunvisor
  • GPS/Navigation (Rand McNally) – Am/Fm/MP3/Bluetooth Stereo

Additional Features Include:

  • 7 Gallon DEF Tank
  • Full Air Brake System
  • Air Driver Seat with RH Armrest
  • Passenger Bucket Seat
  • Full Rear Bench Seat
  • Factory Aux Switch Panel
  • 255/70R22.5 Tires
  • Chrome Bumper
  • Chrome Finish Grill
  • Daytime Running Lights
  • Power Windows – Locks – Mirrors
  • Muncie Hot Shift PTO with Idle-Up
  • Waterproof Circuit Breaker (80 Amps)
  • Stainless Steel Wheel Hub & Lug Nut Covers

SP9000™ Generation IV Hydraulic SidePuller™ – Features Include:

  • Stainless Steel Sign Panel
  • Boom Rating – 8,000 lbs.
  • Stiff Leg Rating – 8,000 lbs.
  • 9,000 lb. High Drive Planetary Winch
  • 3/8″ x 100′ Steel Core Winchline
  • Winch Tensioner
  • Easy Access Free-Spool Release Handle
  • Hydraulic Stiff Legs with pavement pad and ice grousers (Internal lock valve prevents retraction in the vent hose failures)
  • Flipper Foot Spades (including Low-Pull attachment points)
  • Ten Tie-Back Points
  • Center Pivoting Boom Head (Can be used to recover by itself!)
  • “Revolution Boom Head” – New from “In-The Ditch™ Towing Products”. Features a pivoting guide with removable guide cover to easily set-up your wire rope for use.
  • Painted Black – PPG Paint (Limited Lifetime Warranty)
  • “Mobile Control Systems” Wireless Remote Control is used to operate Carrier & Side Puller Winches.
  • IWS Exclusive – Custom Swept-wing LED Lightbar with Angled Steel Pylon & Stainless Steel Trim-work. This custom Lightbar uses Towmate’s Power Link technology to power (22) Individual LED Light Modules for an awesome strobe bar with built in directional arrow stick on the rear. This also includes rear LED brake, turn and tail lights, and 2 White-LED Swivel Work Lights

20.5’ Chevron Series 12 LCG Car Carrier

  • 12,000lb Deck Rating
  • 3/16 “One-Piece” Deck Plate Carrier Surface
  • Front Left and Right Chain Trays
  • 2 X 2 “CorTen” Steel Tube Cross Members – 8 Inches on Center
  • 102 In. Wide Body
  • 2 Front / 4 Rear Chain Locks
  • 6 Floor Plate Chain Locks
  • Four Safety Chains – 2 Front, 2 Rear
  • Front Left and Right Chain Trays
  • 24 GPM Direct Mount Pump Replaces Standard 18 GPM Pump
  • High Speed 9,000 Lb. Planetary Low Mount Car Carrier Winch
  • Air controlled free spool for the winch. This option allows free-spool control of the winch from the control station so you don’t have to walk to the winch every time.
  • 3/8″ x 50′ Winchline with Swivel Hook
  • Cable Tensioner
  • Cable Roller Guide
  • Independent 4,000lb Rated Wheel Lift
  • 4,000 L-Arms with Wheel Retainer Pans
  • Releasable L-Arm Wheel Retainers
  • Mechanical Anti-Tilt to prevent rollback tilting while in bed locks
  • Wheel Lift Tie-Down Straps & Ratchets
  • Illuminated Dual Controls with Driver Side Hydraulic Pressure Gauge
  • Includes Side Puller Control Handles to Manually Operate Legs & Winch (allows feathering speeds of winch and legs)
  • LED Body & Tail Lighting
  • Strobing Body & Tail Lights
  • Water Resistant Junction Box for Wire Harness Connection
  • Wireless Remote Control for Carrier & Side Puller Winches
  • Removable Steel Open Side Rails
  • Deck Mounted Work Lights – L.E.D.
  • Lower Work Lights – L.E.D.

Equipped with the Most Popular Tool Box Package Available!!!

70”x18”x18” – ‘In the Ditch™’ Pro Series™ Aluminum Tool Box – Driver Side Includes:

  • Galvanized Tool Box Mounts – 3 each
  • 70” x 16” Aluminum Box Top Tray – with 2 equipment dividers
  • 34.75” Storage Fender
  • Raised aluminum interior shelf – full box length
  • 2 upper shelf equipment dividers
  • 4 lower shelf equipment dividers
  • (2) LED interior tool box lights
  • LED Storage Fender Strip Lighting
  • Shielded Wiring Bracket
  • 4 Gallon Trash Can & Mount
  • 5 Gallon Liquid Can & Mount
  • Dry Dek Matting – (Tool Box & Top Tray)

70”x18”x18” – ‘In the Ditch™’ Pro Series™ Aluminum Tool Box – Passenger Side Includes:

  • Galvanized Tool Box Mounts – 3 each
  • 70” Aluminum Lumber/Storage Basket – Mounted behind tool box
  • 70” x 16” Aluminum Box Top Tray – No dividers to store longer items
  • 34.75” Storage Fender
  • Raised aluminum interior shelf – half box length
  • Revolutionary new floor jack storage bracket with drain holes
  • ‘Torin’ 2.5 Ton Floor Jack
  • (2) LED interior tool box lights
  • LED Storage Fender Strip Lighting
  • Lug wrench bracket – Holds 2 wrenches
  • Hook rack – 4 hooks to hold tape, shackles, etc.
  • Air Service Fitting
  • Shielded Air & Wiring Bracket
  • 4 Gallon Trash Can & Mount
  • 5 Gallon Liquid Can & Mount
  • Dry Dek Matting – (Tool Box & Top Tray)

Additional Accessories

  • 1 Nylon V Bridle With 24″ Legs and Cluster Hooks 5,400lb WLL
  • 8-point tie-down system with D-ring
  • 1 Magnetic LED Tow Light w/ Round Magnets

2018 Freightliner M2 Extended Cab – 144″ CA *SOLD*

Stock # 8029

2018 Freightliner M2 Extended Cab – 144″CA – Yellow in Color

Cummins 300 HP – Air Locking Rear Differential – Premium Driver Seat

(Photos not of the actual vehicle)

It is not too late to make changes to this build if a SidePuller™ is not in your plan.  Please call for details.

  • Cummins ISB 6.7L – 300hp
  • Variable Geometry Turbocharger with Exhaust Brake
  • 2010 EPA/CARB Emission Certified
  • 6-Speed Allison Automatic Transmission
  • 26,000 Lbs. GVWR
  • 10,000lb. Front Axle
  • 10,000lb. Front Suspension
  • 21,000lb Rear Axle
  • 4.88 Rear Ratio
  • Air Locking Rear Differential
  • 21,000lb. Rear Suspension with Dump Valve
  • Auto Engine Fan Control with Manual Switch on Dash
  • Air Brake System
  • Air Dryer with Heater
  • 144″ Cab-To-Axle
  • (2) 50 Gallon Polished Aluminum Fuel Tank – Driver side and Passenger side
  • Polished Stainless Steel Steps – Driver side and Passenger side
  • 6 Gallon DEF Tank
  • Snow Shield for Fresh Air Intake
  • Michelin XZE Front Tires: 255/70R22.5
  • Michelin XD2 Rear Tires – 255/70R22.5
  • Polished Aluminum Wheels With Dura-Bright Finish (4) Steel Inside (2)
  • (2) Alliance Maintenance Free 1900 CCA Batteries
  • 160-Amp Alternator
  • 18.7-CFM Air Compressor
  • Electric Grid Air Intake Warmer
  • 750 Watt / 115 Volt Block Heater
  • Chrome Bumper; Grille; Air Intake; Headlight Bezels
  • LED Marker Lights
  • Dual West Coast Bright Finish Mirrors – Power Operated
  • Opal Gray Vinyl Interior
  • Premium Air Ride Driver Seat with Dual Armrests
  • Bucket Passenger Seat
  • Full Width Rear Bench Passenger Seat
  • Tilt-Telescoping  Steering Wheel
  • Power Windows / Power Door Locks / Cruise Control / Power Mirrors
  • AM/FM/WB/CD/Bluetooth Radio with Front Auxiliary/USB Inputs
  • Daytime Running Lights

SP9000™ Generation IV Hydraulic Side Puller – Features Include

  • Boom Rating – 9,000 lbs.
  • Stiff Leg Rating – 9,000 lbs.
  • 9,000 lb. High Speed Planetary Winch
  • 3/8″ x 100′ Steel Core Winch line
  • Winch Tensioner
  • Easy Access Free-Spool Release Handle
  • Hydraulic Stiff Legs with pavement pad and ice grousers (Internal lock valve prevents retraction in the event hose failures)
  • Flipper Foot Spades (including Low-Pull attachment points)
  • Ten Tie-Back Points
  • Center Pivoting Boom Head (Can be used to recover by itself)!
  • “Revolution Outer Boom Head” – from “In-The Ditch Towing Products”. Features a pivoting guide with removable guide cover to easily set-up your wire rope for use.
  • Painted Black – PPG Paint (Limited Lifetime Warranty)
  • “Mobile Control Systems” Wireless Remote Control is used to operate Carrier & SidePuller™ Winches.
  • IWS Exclusive – Custom Swept-wing LED Lightbar with Angled Steel Pylon & Stainless Steel Trim-work. This custom Lightbar uses Towmate’s Power Link technology to power (22) Individual LED Light Modules for an awesome strobe bar with built in directional arrow stick on the rear. This also includes rear LED brake, turn and tail lights.

20.5’ Chevron Series 12 LCG Car Carrier (LoadRite Option)

What is the LoadRite Option?  Simply stated…this incredible feature is Chevron’s version of the popular improved load angle design at the aft end of the carrier deck.  The LoadRite Option improves an already incredibly low LCG load angle by an additional 3 Degrees.

Why is LoadRite better?  This creative approach utilizes a recessed main deck while body sides remain unaltered and level from front to back. This brilliant design eliminates the need of fixed side rails (commonly referred to as fins) to reinforce the angled tailboard.  On steel bodies; a bonus standard feature adds chain locks at 12” spacing on both sides – front to back on the interior vertical sills.  Added to the existing horizontal deck mounted chain locks; this provides over 40 tie-down points to secure your load!  This is a Chevron Exclusive Feature!

  • 20.5ft Steel Rollback Car Carrier Body
  • LoadRite option
  • 12,000lb Deck Rating
  • 102 In. Wide Body
  • (12) Chain Locks/Tie-Down Points (Horizontal Deck)
  • 3/16 “One-Piece” Deck Plate Carrier Surface
  • 2 X 2 “CorTen” Steel Tube Cross Members – 8 Inches on Center
  • Four Safety Chains – 2 Front, 2 Rear
  • Front Left and Right Chain Trays
  • 24 GPM Direct Mount Pump Replaces Standard 18 GPM Pump
  • High Speed 9,000 Lb. Planetary Low Mount Car Carrier Winch
  • Air controlled free spool for the winch. This option allows free-spool control of the winch from the control station so you don’t have to walk to the winch every time.
  • 3/8″ x 50′ Winchline with Swivel Hook
  • Cable Tensioner
  • Cable Roller Guide
  • Independent 4,000lb Rated Wheel Lift
  • 4,000 L-Arms with Wheel Retainer Pans
  • Releasable L-Arm Wheel Retainers
  • Mechanical Anti-Tilt to prevent rollback tilting while in bed locks
  • Wheel Lift Tie-Down Straps & Ratchets
  • Illuminated Dual Controls now with LED Lighting
  • Includes Side Puller Control Handles to Manually Operate Legs & Winch (allows feathering speeds of winch and legs)
  • LED Body & Tail Lighting
  • Strobing Body & Tail Lights
  • Water Resistant Junction Box for Wire Harness Connection
  • “Mobile Control Systems” Wireless Remote Control for Carrier & SidePuller™ Winches.
  • Removable Steel Open Side Rails
  • Deck Mounted Work Lights – L.E.D.
  • Lower Work Lights – L.E.D.

Equipped with the Most Popular Tool Box Package Available!!!

Driver Side Includes:

  • 70” x 18” x 18” – ‘In the Ditch’ Pro Series Aluminum Tool Box
  • ‘In the Ditch’ Galvanized Quick Hang Tool Box Mounts – 3 each
  • 70” x 16” Aluminum Box Top Tray – with 2 equipment dividers
  • 34.75” Storage Fender
  • Raised aluminum interior shelf – full box length
  • 2 upper shelf equipment dividers
  • 4 lower shelf equipment dividers
  • (2) LED interior tool box lights
  • LED Storage Fender Strip Lighting
  • Shielded Wiring Bracket
  • 4 Gallon Trash Can & Mount
  • 5 Gallon Fuel Can & Mount
  • Dura-Grid Black Matting – (Tool Box & Top Tray)

Passenger Side Includes:

  • 70”x18”x18” – ‘In the Ditch’ Pro Series Aluminum Tool Box
  • ‘In the Ditch’ Galvanized Quick Hang Tool Box Mounts – 3 each
  • 70” Aluminum Lumber/Storage Basket – Mounted behind tool box
  • 70” x 16” Aluminum Box Top Tray – No dividers to store longer items
  • 34.75” Storage Fender
  • Raised aluminum interior shelf – half box length
  • Revolutionary new floor jack storage bracket with drain holes
  • ‘Torin’ 2.5 Ton Floor Jack
  • (2) LED interior tool box lights
  • LED Storage Fender Strip Lighting
  • Lug wrench bracket – Holds 2 wrenches
  • Hook rack – 4 hooks to hold tape, shackles, etc.
  • Air Service Fitting – Dust Cover Included
  • Shielded Air & Wiring Bracket
  • 4 Gallon Trash Can & Mount
  • 5 Gallon Fuel Can & Mount
  • Dura-Grid Black Matting – (Tool Box & Top Tray)

2007 Ford F-550-Super Duty Crew Cab XL 2WD *SOLD*

2007 Ford F-550-Super Duty Crew Cab XL 2WD 65862 Miles

Stock #1943

-Ford Built Powerstroke 6.0L Diesel engine 325Horsepower, 570 lb/ft Torque

– TorqShift 5-speed Automatic with Tow/Haul mode

– 6K FAWR – 13.5K RAWR – 19,500 GVWR

– 40 Gallon Fuel Tank

– Running Boards

– Chrome Bumper

– Chrome Grill

– Steel Wheels

– 225/70R19 Tires

– Power mirrors – Power Door Locks – Power Windows

– Air Conditioning

– Tilt Steering Column

– Tan Cloth Bench Front and Rear Seats

– Service Trucks International Service Bed

-Enclosed Oxygen/Acetylene Storage

-Two Tool Boxes in Bed (one 3-drawer and one top load)

– (7) Storage Boxes with Shelves

– One 10-drawer Tool Box inside Driver Side Storage Box

– One 3-drawer Tool Box in Left Rear Storage Box

– One 3-drawer Tool Box in Right Rear Storage Box

– Tunnel Box at Rear of Service Box

– 8” Vise

– Fire Extinguisher

– Gas Powered Miller Trailblazer CC/CV/AC/DC Welder/11K Generator/120/240

– White in Color

 

2004 Ford F-550-Super Duty Crew Cab XL 2WD *SOLD*

2004 Ford F-550-Super Duty Crew Cab XL 2WD 87775 Miles

Stock #0748

-Ford Built Powerstroke 6.0L Diesel engine 325Horsepower, 560 lb/ft Torque

– TorqShift 5-speed Automatic with Tow/Haul mode

– 6K FAWR – 13.5K RAWR – 19,500 GVWR

– 40 Gallon Fuel Tank

– Running Boards

– Chrome Bumper

– Chrome Grill

– Steel Wheels

– 225/70R19 Tires

– Manual mirrors

– Manual Door Locks

– Manual Window

– Air Conditioning

– Tilt Steering Column

–  Tan Cloth Bench Front and Rear Seats

– Service Trucks International Service Bed

– Enclosed Oxygen/Acetylene Storage

– Two Tool Boxes in Bed (one 3-drawer and one top load)

– (7) Storage Boxes with Shelves

– One 10-drawer Tool Box inside Driver Side Storage Box

– One 3-drawer Tool Box in Left Rear Storage Box

– One 3-drawer Tool Box in Right Rear Storage Box

– Tunnel Box at Rear of Service Box

– 8” Vise

– Fire Extinguisher

– Gas Powered Miller Trailblazer CC/CV/DC Welder/10K Generator/120/240

– White in Color

 

Professional Detailer and Shop Help

Professional Detailer/Shop Help

“The whole secret of a successful life is to find out what is one’s destiny to do, and then do it.”
― Henry Ford
Perhaps your destiny is to build a career here at Idaho Wrecker Sales. Why not apply today and see what we are all about. We have just acquired 6 acres of new property and we are expanding again. We have finished Phases 1 & 2 and starting on Phase 3, so we are seeking passionate, energetic people to join our team.
The Professional Detailer/Shop Helper will need to have a “Rock Star” attitude and have the ability to make Detail Magic. If you have professional detailing experience, can teach and lead others, this might be the job for you. We operate a very organized shop with extreme attention to detail. All of the trucks we build are true custom trucks that are designed by our crew to be the absolute best they can be.

Job Details:
• Work shift would be Monday through Friday, 8:00am to 5:00pm
• Professionally detail all motor coaches and tow trucks
• Prepare motor coaches and tow trucks for customer delivery
• Ensure all motor coaches and tow trucks are locked and secured at close of business
• Assist in the shop when requested

Qualifications:
• A solid set of detailing and vehicle reconditioning skills
• Leadership skills and the ability to teach others
• Great work ethic
• Basic computer skills
• Ability to use power and hand tools in a safe manner
• Basic shop knowledge preferred, but willing to train
• ROCK STAR ATTITUDE

Why Apply:
• Great Pay
• Health Insurance
• Matching IRA contribution
• Paid Holidays and Vacation
• Leadership training events held weekly
• Incredible opportunities to advance and contribute
• Great opportunity to make a difference in our world by working with people that really care
• We are a company that truly believes in getting better each and every day. This goes for our Company and the people who work here.

Team members of Idaho Wrecker Sales are offered Full-time employment, competitive pay, health insurance, matching IRA contributions, generous holiday and vacation plans, and a clear path to advancement via a robust cross-training program. We also have a dedicated commuter van from Boise that makes travel to and from work convenient and cost effective. If that’s not enough, we also really know how to party with catered monthly luncheons and onsite activities like four-way tug-of-war, pinewood derby competitions, and dodgeball, dodgeball, DODGEBALL!
How to Apply
• Email your resume’ to hr@idahowreckersales.com
• Must include 3 professional references of previous work history with your resume (We will not consider any candidates who do not provide past work history and contact numbers.)
• Call Erika at 1-208-587-2888 with any further questions about the position.

Email HR at hr@idahowreckersales.com with further questions or inquiries regarding this opportunity, or to learn more visit our website at www.idahowreckersales.com.

Industrial Painter and Body Shop Technician

Industrial Painter and Body Shop Technician

Idaho Wrecker Sales, the world’s leading builder of custom tow trucks and luxury motor coaches, has opened a new facility and is seeking passionate, energetic people to join our team.  With our rapid growth we’re looking to fill new positions and expand our staff.  If you dream of working in an environment where your ideas can be turned into a reality, this may be the place for you.  Our products have been featured in numerous trade magazines, and won a variety of top industry awards. Our Paint Department is known throughout the country for its award winning designs and graphic imagery.

We are currently seeking an Industrial Painter and Body Shop Technician.  Applicant should be familiar and experienced with:

  • Industrial painting, and body shop work
  • HVLP spray gun experience, and use of industrial paint tools
  • Understanding of automotive finishes

The ideal candidate would also have experience in the following:

  • Paint manufacturer’s certifications
  • Minimum of two years painting experience

Team members of Idaho Wrecker Sales are offered Full-time employment, competitive pay, health insurance, matching IRA contributions, generous holiday and vacation plans, and a clear path to advancement via a robust cross-training program.  We also have a dedicated commuter van from Boise that makes travel to and from work convenient and cost effective.  If that’s not enough, we also really know how to party with catered monthly luncheons and onsite activities like four-way tug-of-war, pinewood derby competitions, and dodgeball, dodgeball, DODGEBALL!

 

How to Apply

  • Email your resume’ to hr@idahowreckersales.com
  • Include a minimum of 3 professional references along with their contact numbers
    (We will not consider any candidates who do not provide these references)

Email HR at hr@idahowreckersales.com with further questions or inquiries regarding this opportunity, or to learn more visit our website at www.idahowreckersales.com.

Retail Parts Sales

Retail Parts Sales

Idaho Wrecker Sales, the world’s leading builder of custom tow trucks and luxury motor coaches is seeking a passionate, energetic person to join our team. This is a great opportunity for that person who wants to build a long term career with us and who wants to help us grow our business. We have just started construction on a new addition to our facility. With this expansion we need to increase our sales force and now have a great opportunity available to someone who enjoys working with equipment and enjoys sales.

Our products have been featured on the covers of numerous trade magazines and won a variety of top industry awards for our custom trucks. We are not looking for boring candidates, only those who want to help us continue to lead the nation in innovation and building bad to the bone tow trucks.

You would be working in our parts department with 2 other people selling parts to retail customers for both Custom Tow Trucks and Beautiful Custom Coaches. You would also be supplying our own shop with parts on a daily basis.

Here at IWS, we are a family-owned business that’s been in Mountain Home for over 20 years with no plans to move. We have found great success by recruiting people who are excited about working here and want to be a part of our culture. We truly believe in coaching and developing people who have a great attitude, work ethic and want to leave their mark on the world. At IWS, we value people for their Enthusiasm, Commitment, Hard Work and ability to do things better each day, not just for their certifications and degrees or for the buzzwords on their resumes. We love candidates that believe that our only opportunity to win in the marketplace will come by hiring and retaining the best people in the industry. If you have the desire to help us build a great company and want to surround yourself with people who share the same vision, please apply today.

Job Details:

  • Receive and fill telephone orders for parts
  • Fill customer orders from stock and place orders when requested items are out of stock.
  • Manage shipments by researching shipping methods or costs and tracking packages
  • Maintain and clean work and inventory areas
  • Set up advertising displays or arrange merchandise on counters or tables to promote sales
  • Keep the showroom clean and orderly

Qualifications:

  • Enjoy working one on one with customers in person and on the phone
  • Have a solid set of computer skills
  • Knowledge of tow truck parts or Towing industry would be a big plus.
  • Experience working in the truck, RV or equipment industry.
  • Enjoy working in the Custom Truck Industry
  • Be able to lift and carry parts up to 50 lbs.
  • Experience in retail Sales would be great but not a requirement.
  • Have great attitude and enjoy working for a smaller company that know how to have fun.

Why Apply:

  • Great Pay
  • Health Insurance
  • Matching IRA contribution
  • Paid Holidays and Vacation
  • Leadership training events held weekly
  • Incredible opportunities to advance and contribute
  • Great opportunity to make a difference in our world by working with people that really care
  • We are a company that truly believes in getting better each and every day. This goes for our Company and the people who work here.

Team members of Idaho Wrecker Sales are offered Full-time employment, competitive pay, health insurance, matching IRA contributions, generous holiday and vacation plans, and a clear path to advancement via a robust cross-training program.  We also have a dedicated commuter van from Boise that makes travel to and from work convenient and cost effective.  If that’s not enough, we also really know how to party with catered monthly luncheons and onsite activities like four-way tug-of-war, pinewood derby competitions, and dodgeball, dodgeball, DODGEBALL!

How to Apply

  • Email your resume’ to hr@idahowreckersales.com
  • Must include professional references of previous work history with your resume.    (We will not consider any candidates who do not provide past work history and contact numbers.)
  • Call Shonna at 1-208-587-2888 with any further questions about the position.

Email HR at hr@idahowreckersales.com with further questions or inquiries regarding this opportunity, or to learn more visit our website at www.idahowreckersales.com.